Cardiac CT (prospective acquisition)
Citation, DOI, disclosures and article data
At the time the article was created Joachim Feger had no recorded disclosures.View Joachim Feger's current disclosures
A prospective ECG-gated cardiac CT angiogram, also known as the step and shoot method, is considered the default or ‘bread and butter’ protocol for coronary CTA and combines a reasonably low radiation dose with diagnostic results in most situations. Nowadays, this protocol is available on most CT scanners with cardiac CT capability.
Please refer to our coronary CT angiography article for general indications.
The main purpose is a diagnostic acquisition of a coronary angiogram with minimal cardiac motion. This exam is also utilized in patients with regular heart rates of ≥60 bpm and is quite reliable in terms of diagnostic quality. However, it does not give any information regarding cardiac functionality in the same way as a retrospective scan (that images phases of the heart).
The 'step and shoot' name comes from the technique, images are obtained in a sequential or strict axial manner during a pre-defined phase of the cardiac cycle (R-R interval) without table movement at the time of data acquisition. After one set of images has been obtained the scanner moves to the next imaging position for further data acquisition 2,3. Newer scanner types with broad detectors can cover the heart within 1-4 heartbeats.
A prospective ECG-gated cardiac CT angiogram requires a regular sinus rhythm and is less favorable in very high heart rates.
For patients with atrial fibrillation/arrhythmia that do not meet these criteria see:
For patients <100kgs, stable sinus rhythm and a heart rate <60 bpm consider:
for higher heart rates (>70bpm) consider widening the acquisition window (padding) 1:
heart rate <65 bpm: 65-75%
heart rate 65-72 bpm: 60-80%
heart rate >72 bpm: 35-80%
each artery will suffer from motion artefact at different phases, the following intervals are the best ‘windows’ to prevent movement for different arteries