Elbow (external oblique view)
Citation, DOI, disclosures and article data
At the time the article was created Andrew Murphy had no recorded disclosures.View Andrew Murphy's current disclosures
The elbow external oblique view is an additional projection of the elbow often used to better demonstrate the radial head free from superposition.
This external oblique view is an additional projection often used to separate the proximal radius from the ulna for closer inspection of structures such as the radial head.
patient is seated alongside the table
the fully extended arm and forearm, in a supinated position, are kept in contact with the table by lowering the shoulder joint to the level of the table they all must be in the same plane as the detector
the patient externally rotates the arm to isolate the radial head
the detector is placed below the elbow joint
anteroposterior external oblique projection
mid elbow which is approximately the midpoint between the epicondyles
superior to the distal third of the humerus
inferior to include one-third of the proximal radius and ulna
lateral to include the skin margin
medial to include medial skin margin
18 cm x 24 cm
Image technical evaluation
the elbow is in an external oblique project position
patient's arm should be rotated externally more so than the AP projection so the radial head is free from superposition
Patients with true radial head fractures/injuries of the elbow will find it very hard to externally oblique for the projection, it's best to encourage the patient to rotate from their shoulder. Therefore, not isolating the elbow joint, often this involves the patient leaning toward the side of obliquity.