High voltage generator

Last revised by Jeremy Jones on 9 Jul 2020

X-ray units require a high voltage generator to achieve the necessary power required of an x-ray tube. AC power will supply x-ray units with sinusoidal currents, resulting in 'peaks and troughs', limiting an x-ray tube to produce x-rays only half of the 1/60th of s second cycle. 

A single-phase high voltage generator converts this AC power into a half or full wave rectified supply with a measure in the thousands of volts. 

The half wave rectification results in a peak voltage that will dip to zero, reoccurring; this will consequently have an effect on the behavior of radiation produced and hence the name kilovoltage peak (kVp) was born. 

The advancement of high voltage generators from single-phase to three-phase to constant potential generators have overcome this 'voltage ripple' creating a continuous, uninterrupted voltage. Modern x-ray units, which largely utilize, constant potential generators do not have 'voltage ripple' and consequently employ the term kV rather than kVp. 

ADVERTISEMENT: Supporters see fewer/no ads