Noise (computed tomography)

Andrew Murphy et al.

Noise in computed tomography is an unwanted change in pixel values in an otherwise homogenous image. Often noise is defined loosely as the grainy appearance on cross-sectional imaging; more often than not, this is quantum mottle. 

Noise in CT is measured via the signal to noise ratio (SNR); comparing the level of desired signal (photons) to the level of background noise (pixels deviating from normal). The higher the ratio, the less noise is present in the image.

Noise in a cross-sectional image will equal a decrease in the picture quality and inadvertently will hinder the contrast resolution.

Factors affecting noise

mAs

The mAs or the dose of a CT scan has a direct relationship with the number of photons utilised in the examination. A useful relationship to keep in mind is:

2 x mAs = 40% increase SNR

Increasing the dose of the scan will decrease the amount of noise and hence improve the contrast resolution of the image. However it comes at a cost, and balancing the dose with the contrast resolution required for interpretation must be considered when determining examination settings.

Studies that rely on superior contrast resolution will inescapably require a higher dose than examinations that can tolerate a higher amount of noise, for example, liver imaging vs. cardiac calcium scores.

Slice thickness

The number of photons available to generate an image has a linear relationship to the slice thickness. The thicker the slice, the more photons available; and the more photons available, the better the SNR. However, this isn't without a trade off because increasing the slice thickness will decrease the spatial resolution in the z-axis.

Patient size

Larger patients will absorb more radiation than smaller ones, meaning fewer photons will reach the detector hence reducing the signal to noise ratio.

Imaging technology
Share article

Article information

rID: 51832
Section: Radiography
Synonyms or Alternate Spellings:
  • Noise artefact
  • Noise artefacts
  • Noise artifact
  • Noise artifacts

Support Radiopaedia and see fewer ads

Updating… Please wait.

 Unable to process the form. Check for errors and try again.

 Thank you for updating your details.