Rib (AP oblique view)
The AP oblique rib projection is performed to best demonstrate the axillary ribs. Oblique ribs may be conducted either as an anterior oblique or posterior oblique view.
- the patient may be erect or supine with their right (RPO) or left posterior (LPO) side closest to the image receptor
- affected side is rotated 45 degrees towards the IR
- the patient’s arm closest to the receptor is raised and placed on their head, with the other on their hip
- anteroposterior oblique projection
- suspended inspiration
- above diaphragm: level of T7 (located at the level of the sternal angle approximately 2-3 cm laterally toward the affected side)
- medially include 5 cm lateral to the sternoclavicular joint of the unaffected side
- laterally to the lateral rib margin
- superoinferiorly above diaphragm 5 cm above sterno-clavicular joint
- superoinferiorly below diaphragm lower costal margin
- 35 cm x 43 cm
- 75 – 85 kVp
- 12 – 20 mAs
- 100 cm
Image technical evaluation
- above diaphragm
- 1st – 10th axillary ribs of the affected side are demonstrated without superimposition
- thoracic vertebrae are included
Conducting AP rib oblique views produce less magnification of the ribs, and provides more bony detail than that of the PA view 1.
If conducting a PA oblique projection (LAO/RAO), the affected side is rotated 45 degrees away from the IR, with the CR as per the AP oblique view.
When a patient is unable to stand for an erect projection, have the patient supine and supported by immobilisation devices to adjust the patient into an oblique position.
- 1. Martensen KMQ. Radiographic Image Analysis. 4th ed. St. Louis, Mo.: Elsevier Health Sciences; 2014.